Can you put penny board wheels on a skateboard? This is a question that has been asked by many people and the answer is yes, you can. However, there are some things you need to know before doing so.

In this blog post, we will discuss what you need to know about putting penny board wheels on a skateboard. We will also provide some tips for doing so safely. Keep reading!

Can you put penny board wheels on a skateboard?

Yes, you can put Penny Board wheels on a skateboard. The size and shape of the wheel will depend on what type of skateboard deck you are using. Most decks are designed for standard-sized skateboarding wheels but Penny Board wheels come in different sizes and shapes so it is important to make sure that the wheel fits your particular setup before purchasing. 

Penny Board wheels also have a higher durometer than regular skateboard wheels, so they are typically better suited for tricks and street skating. If you are looking for an upgrade to your skateboarding setup, adding some Penny Board wheels might be just the thing you need.

There are a few things you need to keep in mind when putting penny board wheels on a skateboard.

1) The width of the wheels

The width of the penny board wheels is important. You want to make sure that the wheels are not too wide or too narrow for your skateboard deck.

2) The hardness of the wheels

Second, you need to consider the hardness of the penny board wheels. Softer wheels will grip the pavement better, but they will also wear down faster. Harder wheels will last longer, but they may not grip the pavement as well.

3) The bearing size

The bearing size is the diameter of the hole in the center of the wheel. Larger bearings will spin faster and be more durable, but they may be more difficult to control. Smaller bearings will be easier to control but won’t spin as fast or last as long.

4) Cost of putting penny board wheels

Finally, you need to think about the cost of putting Penny Board Wheels on a skateboard. Softer wheels will wear down faster and will need to be replaced more often. Harder wheels will last longer but may cost more upfront.

What penny boards are and how do they differ from skateboards?

Penny boards are small plastic skateboards that are popular among beginners and experienced skaters alike. They are easy to carry around, making them perfect for getting from point A to point B. Penny boards usually have small wheels, making them great for doing tricks.

Penny boards differ from skateboards in a few ways

  • The main difference between penny boards and skateboards is the size. Penny boards are small enough to fit in a backpack, whereas skateboards are too big.
  • Another difference is that penny boards usually have smaller wheels than skateboards. This makes them better for doing tricks but worse for speed.
  • They are usually made of plastic instead of wood.
  • They are often cheaper than skateboards.

Benefits of using penny board wheels on a skateboard

Penny board wheels have a few benefits over regular skateboard wheels.

  1. Smooth Ride: Penny board wheels provide a smooth and comfortable ride over a variety of surfaces, making them perfect for cruising around town or doing tricks in the skate park.
  2. Durability: Penny board wheels are made from high-quality urethane which is durable enough to hold up against hard landings and tough obstacles.
  3. Lightweight: They are much lighter than regular skateboard wheels, making them easier to maneuver and carry around.
  4. Versatility: Penny board wheels can be used for street skating and in the park, giving you plenty of options when riding your board.
  5. Cost-effective: Penny boards are an affordable way to get into the skateboarding world, making them great for beginners and experienced skaters alike.
  6. Improved Control: With their smaller size and weight, penny board wheels provide improved control over regular skateboard wheels, allowing you to easily carve turns and shred transitions.
  7. Anti-Slip Surface: The anti-slip texture on the surface of penny board wheels gives you extra grip when grinding and sliding, helping you to stay in control even during high speeds.
  8. Low Maintenance: Penny boards require very little maintenance, making them an ideal choice for those who don’t want to spend a lot of time and money on upkeep.
  9. Customization: With their wide variety of color options, you can customize the look of your board to make it truly unique.

Install penny board wheels on a skateboard

Here we explain the step-wise procedure for installing penny board wheels on a skateboard

1) Get the right wheels

The first step is to get the right wheels for your skateboard. You need to make sure that the wheels are not too wide for your skateboard deck. The width of the wheels should be between 50 and 60mm.

2) Remove the old wheels

The next step is to remove the old wheels from your skateboard. To do this, use a skate tool or a pair of pliers.

3) Place the new wheel on the axle

Next, take the new Penny Board wheels and place them on the axle of your skateboard. Make sure that the bearings are facing the correct way. Be careful not to overtighten the nuts, as this can damage the threads.

4) Install the wheels

Finally, you need to install the wheels on your skateboard. The easiest way to do this is to use a bearing press. If you don’t have a bearing press, you can also use a hammer and punch to install the bearings.

5) Check for any loose bolts

After you have installed your wheels, you need to check for any loose bolts. You should also check the tightness of the bearings.

6) Go for a test ride

Once you have installed your wheels and checked for any loose bolts, you are ready to go for a test ride. Start by riding slowly until you get used to the feel of the new wheels.

Tips for riding with penny board wheels on a skateboard

  • Ride slowly at first: When you first start riding with penny board wheels on your skateboard, you should ride slowly at first. This will help you get used to the feel of the new wheels.
  • Don’t ride in the rain: Penny board wheels are not meant for riding in the rain. The wet surface can cause the wheels to slip and make it difficult to control your skateboard.
  • Be careful when doing tricks: When you are doing tricks with penny board wheels, you need to be careful. This is because the wheels are softer and more prone to breaking.
  • Replace the wheels regularly: Penny board wheels will wear down over time and will need to be replaced regularly. You should check the condition of your wheels before each ride and replace them if they are starting to show signs of wear.
  • Store your skateboard in a cool, dry place: When you are not using your skateboard, you should store it in a cool, dry place. This will help to prolong the life of your wheels.

FAQs – Put Penny Board Wheels On A Skateboard

Can you put any wheels on a skateboard?

Yes, you can put any type of wheel on a skateboard as long as the wheels are designed for skating. The most common types of wheels used for skateboarding are polyurethane-based wheels, which provide good grip and durability for street skating. 

However, if you want to use your board in other settings (such as off-road terrain), you may need to choose a different type of wheel. Wheels specifically designed for off-road skating are available and will provide the necessary traction and stability needed in more rugged conditions. 

Additionally, choosing the right size of wheel is important as it can affect your overall performance on the board. Generally, the width of the wheels should be between 50 and 60mm.

Are Penny board wheels the same as longboard wheels?

No, Penny boards and longboards use different kinds of wheels. Longboard wheels are usually larger and softer and have a bigger contact patch to provide more grip on rough surfaces. They also typically have an inner core made from urethane that absorbs vibrations to provide a smoother ride. Penny board wheels, on the other hand, are much smaller and harder, making them perfect for tricks and fast riding on smooth surfaces.

Is it ok to put longboard wheels on a skateboard?

No, it is not recommended to put longboard wheels on a skateboard. Longboard wheels are usually softer and larger than skateboard wheels, meaning they will not perform as well on the shorter and harder surface of a skateboard.

Additionally, the size of longboard wheels can cause issues when trying to fit them onto a skateboard axle since they may be too large for the skateboard axle. Therefore, it is best to use skateboard wheels on a skateboard and longboard wheels on a longboard. 

How do you turn a skateboard into a cruiser?

There is no definitive answer to this question. Some people recommend adding risers to your skateboard to raise the wheels off the ground. Others suggest adding larger wheels to your skateboard.

What skateboard wheels are best for the street?

The best skateboard wheels for the street are ones that are made of hard plastic. These wheels will provide you with a smooth ride and will be able to handle the abuse of concrete.

Final Words

Penny boards are a great beginner’s board and they’re easy to transport. Penny Board wheels can be put on a skateboard. Skaters have been doing this for years to get the benefits of both boards.

If you’re looking for a new way to ride, try using penny board wheels on your skateboard. With the right setup, you’ll be able to do more tricks and ride with more control. Thanks for reading!


Hi there! My name is James Harris, a professional snowboarder and an instructor but most importantly - I'm a mountain lover! Skiing is my passion and I love to spend as much time on the slopes as possible. When I'm not shredding the gear, you can find me hanging out with my wife and kids. They are my world!